• A Network Switch Mapping Solution
  • Search

About the Switch Compatibility List

This chart shows switches that have been tested with the Managed Switch Port Mapping Tool by ourselves and our customers. If your switch is not listed that simply means we have not tested it or a user has not reported test results to us. The best thing you can do is try the software with your switch. This list will expand to include more switches as test results are reported to us. Report your results here. The manufacturer/model names of the switches are trademarks of their respective companies.

'Yes' - this means the switch is reporting MAC addresses of attached devices. It does not necessarily mean that all possible columns are populated because different brands may report some of the information but not all.

'No' - this may not be permanent. Changes to switch firmware may make that a 'yes', so try it for yourself and report to us the change and the firmware version. For old switch models 'no' is probably permanent.

Data last updated February 27, 2024.

Will this app map your switch?

The fastest way to find out is to try it for yourself with your switches.

Chart Legend

"Yes, fully tested in-house" means we have personally tested it ourselves, "Yes" or "No" means an end-user reported the test results to us.

3Com

Model Does it map? Comments
SS II 1100 Yes
2928 Yes, fully tested in-house 5.20 Release 1101P10
2952 Yes
SS II 3300 Yes
SS II 3900 Yes
4050 Yes
SuperStack 3 4400 Yes
SuperStack 3 4500 Yes, fully tested in-house
SuperStack 3 4500 in stack mode Yes Recommend using switch OS V3.03.02s168p21 or newer. v3.03.02s168p15 will give high switch CPU utilization and will not map properly.
4800G Yes, fully tested in-house
4924 Yes

Adtran

Model Does it map? Comments
1238 Yes Tested with firmware 17.09.02.00 (LLDP works fine with this firmware). April 5, 2013.
1534 Yes, fully tested in-house Tested with firmware 18.01.01.00 April 5, 2013. Tested in house with firmware 17.07.01.00 August 16, 2017.
1544 Yes Tested with firmware 18.01.03.00 April 5, 2013.
NetVanta 1550-24P No Does not show connected devices. qBridge mib and Bridge mib are not available through SNMP. Firmware NV1550A-R12-3-1.biz, tested 4-28-2017.
1638PoE 3 switch stack No and Yes (no stack) No (3 switch stack): Tested with firmware R10.9.4, Date: Fri Jun 6 11:30:16 CDT 2014. Reported by user Sept 30, 2014. No support for qBridge or Bridge MIBs.
Yes (no stack): Tested with firmware R11.5.1 Date: August 16, 2017 - observed enduser map two switches successfully.

Allied Telesis/Allied Telesyn

Model Does it map? Comments
x908 Yes Requires firmware version 5.4.2 or newer. Firmware 5.3.4 does not work.
x600 Yes Requires firmware version 5.4.2 or newer. Firmware 5.3.4 does not work.
AT-8000GS Yes
AT-GS950/24 No User had latest firmware as of 3-18-10, but a full dump showed bridge mib did not seem to be fully populated.

Amer.com

Model Does it map? Comments
SS2GR26i Yes - requires v2.60 Tested by customer 11-13-15
SS2GR50i Yes - requires v2.60 Tested by customer 11-13-15

Aruba

See HPE below

Avaya (Nortel)

Model Does it map? Comments
2526 Yes
3524 Yes Reported by user 7-1-2014
4524 Yes Reported by user 7-1-2014
4850 Yes Reported by user 7-1-2014
5632 Yes
5650 Yes
5698 Yes Reported by user 7-1-2014

Brocade

Model Does it map? Comments
ICX6610-24-PE Yes Tested by customer 11-12-15
icx7250 Yes Tested by customer 4-24-18, IOS 08030
icx7450 Yes Tested by customer 4-24-18, IOS 08030

Cisco

Model Does it map? Comments
1783-BMS10CGP Yes Reported by customer July 8, 2019
2900XL Yes
Catalyst 2950 Yes, fully tested in-house
Catalyst 2960 (WS-C2960-24PC-L) Yes, fully tested in-house Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 15.0(2)SE10a, RELEASE SOFTWARE (fc3)
Catalyst 2960 (WS-C2960S-24TS-L) Yes C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE, tested by customer 8-4-17
Catalyst 2960G Yes
2960+ Yes Reported by customer July 8, 2019
2960X Yes Reported by customer July 8, 2019
25xx Yes
3500XL Yes
3550 (WS-C3550-24-SMI) Yes, fully tested in-house Cisco IOS Software, C3550 Software (C3550-IPBASEK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
3560X Yes
3560CX Yes Reported by customer July 8, 2019
3650 Yes
3750-24TS standalone and stacked Yes, fully tested in-house IOS 12.2(55)SE10. Use with SNMPv3 may require config changes
3750G Yes Reported by customer July 8, 2019
3750X Yes Use with SNMPv3 may require config changes. Reported by customer July 8, 2019
3850 Yes Use an IOS newer than 15.0(1)EX3 to be able to see duplex mode information correctly. Tested by customer 1-29-16,
3850 (WS-C3850-24T) Yes IOS-XE Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M) Version 03.03.05SE RELEASE SOFTWARE. Tested by customer 8-4-17,
Also another of same model running Version 03.06.02aE
4006 Yes
4500 Series Yes
4506 Yes - see comments Warning: Version 12.1(19)EW1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) does not map correctly - mac addresses will not appear.
4513 Yes
4948 Yes
6500/6509 Series Yes May require changes to access permissions and SNMP settings.
Small Business SF300-08 Yes, fully tested in-house Tested with SW version 1.4.0.88. Larger 24 port switches also work.
Small Business SG300-10PP-K9 Yes Tested by customer on 8-1-17 using SW version 1.4.0.88, HW version V02. May require change from stacked mode to standalone mode reporting. See this page.
Small Business SG300-24 Yes Tested by customer on 9-1-15 using SW version 1.3.0.62, HW version V04. May require change from stacked mode to standalone mode reporting. See this page.
Small Business SG200-26 Yes, fully tested in-house 11-27-2017. Software Version 1.3.0.62, ROM 1.1.0.6, HW V05 - also v1.3.7.18
Small Business SG220-26 Yes, fully tested in-house 11-27-2017. Software Version 1.1.2.1, ROM 1.0.0.6, HW V03 - Requires SPM v2.79 or newer
Meraki MS220-48LP Yes - partial mapping Customer tested July 2016, however VLAN information is not provided by the switch.
Nexus 3000 (N3K-C3172PQ-10GE) Yes Tested Aug 2017 with Cisco NX-OS(tm) Version 6.0(2)U3(7). Also 7.0(3)I4(6), March 21, 2018.
Nexus 5000s Yes Tested Dec 2013 with Cisco NX-OS(tm) Version 5.0(2)N2(1).
Nexus 5010 Yes Tested June 2012 with Cisco NX-OS(tm) n5000, Software (n5000-uk9), Version 5.0(2)N1(1).
Nexus 5500 Yes Tested Dec 2013 with Cisco NX-OS(tm) Version 5.2(1)N1(5).
Nexus 5596 Yes Tested June 2012 with Cisco NX-OS(tm) n5000, Software (n5000-uk9), Version 5.0(3)N1(1c).
Nexus 7010 Yes Tested Feb 2016 with Cisco NX-OS(tm) n7000, Software (n7000-s2-dk9), Version 6.1(4)
Nexus 9508 Yes, requires v2.72 or newer Tested Nov 10 2016 with Cisco NX-OS(tm) nxos.7.0.3.I2.2d.bin, Software (nxos), Version 7.0(3)I2(2d)
Nexus 93128s Yes Reported Nov 10 2016
Nexus 9396 Yes Tested Nov 28, 2016 with Cisco NX-OS(tm) n9000, Software (n9000-dk9), Version 6.1(2)I2(2a)

Dell and Force10

Model Does it map? Comments
Force10 - C300 Yes Tested Sept 20, 2017.
Force10 - Z9000-01-FE-32T-AC Yes Tested Sept 27, 2017. Application Software Version: 9.4(0.0P5)
Force10 - S3148P-01-FE-52 Yes Tested Sept 27, 2017. Application Software Version: 9.11(0.0P8) and Application Software Version: 9.10(0.0)
Force10 - S4810-01-64F Yes Tested Sept 27, 2017. Application Software Version: 9.11(0.0) and Application Software Version: 9.4(0.0P5) and Application Software Version: 9.2(0.0)
Force10 - S50-01-GE-48T-V Yes Tested Sept 27, 2017, Application Software Version: 8.4.2.7
Force10 - S55-01-GE-44T-AC Yes Tested Sept 27, 2017. Application Software Version: 8.3.5.3 and Application Software Version: 8.3.5.5
Force10 - S60-01-GE-44T-AC Yes, fully tested in-house Tested August 2017 with E8-3-3-333 and Application Software Version: 8.3.3.9. Requires SPM v2.77 or newer for best results.
N2024P/N2048P (N2000/N3000 series) Yes Requires firmware 6.3.2.7 or newer. Especially important to have that firmware version if you are using them in stacked mode. Reported by user on June 15, 2017.
Tested with 6.3.1.8 N2024P 5 switch stack successfully Aug 16, 2017.
N3048P Yes Tested Sept 27, 2017 both single and stacked modes. Linux 3.6.5-601418a5, OS Version: 6.1.2.4 and Linux 3.6.5-a5c6fee7, OS Version: 6.2.1.6 and Linux 3.6.5-320b2282, OS Version: 6.1.0.6 and Linux 3.6.5-1289203e, OS Version: 6.2.0.5
2708/2716/2724/2748 No Switches do not support SNMP management. It only has a web interface that can display some RMON statistics.
2808 Yes
3024 Yes, fully tested in-house Firmware 6.0.4.2492, boot rom version 4.5.2214. Tested 6-19-2017
3224 Yes
3248 Yes
3324 Yes Requires switch firmware version 1.2.0.6 or newer
3348 Yes, fully tested in-house Requires switch firmware version 1.2.0.6 or newer
3448 Yes Requires switch firmware version 1.0.1.13 or newer
S4048-on Yes 9-4-2019
5224 Yes
5324 Yes
5548 Yes Customer tested with a 6 switch stack, Nov 18, 2016.
6024F Yes
6248 Yes Duplex info is not available

D-Link

Model Does it map? Comments
DES-3226 Yes, fully tested in-house Software version 4.00.081 - 11-18-2019
DES-3624 Yes, fully tested in-house Software version V2.00-B45, ignore any rows with ifIndex=0. 11-18-2019
DES-3526 Yes, fully tested in-house
DGS-1210-24 Yes Requires Switch Port Mapper v2.09 or newer

Enterasys

Model Does it map? Comments
SecureStack A-series, B-series and C-series Yes

Extreme Networks

Model Does it map? Comments
Summit 200-24 Yes, fully tested in-house ExtremeWare 7.7e.2 (Build 4)
X150-24t Yes, fully tested in-house ExtremeXOS v12.0.3.16
X250e-24p Yes, fully tested in-house ExtremeXOS v15.2.3.2
Summit48si Yes You may need do this command line first: enable snmp add dot1dTpFdbTable
5520-48W-VOSS Yes OS version 8.2.6.0 Tested by customer July 12, 2021 SPM v2.86

Fortinet - Router/Firewall only - use to retrieve ARP tables

Model Used for Router/Server 1/2 only - do not try to map these devices Comments
Fortigate 201E Turn on SNMP 6.2.3 (build 1066)
Fortigate 501E Turn on SNMP 6.2.3 (build 1066)
Fortigate 1500D Turn on SNMP 6.2.3 (build 1066)

HP (Hewlett Packard)/HPE/Aruba

Model Does it map? Comments
Aruba 1930 (JL683A) Yes Customer report 1-15-2022
Aruba 3810M (JL075A) Yes, fully tested in-house 2 switch stack. ARUBA JL075A 3810M-16SFP+-2-SLOT SWITCH. Revision KB.16.04.0008, ROM KB.16.01.0008
ProCurve 1800 Yes
ProCurve 1800G-8 Yes, fully tested in-house Requires switch firmware P.2.2 or newer for basic mapping. Firmware P.2.12 will also show VLAN information. Note that switch still does not report duplex info as of P.2.12.
HP ProCurve 1810G - 8 GE, P.2.23, eCos-2.0, CFE-2.1 - tested 4-27-2018 (still no duplex info)
V1910 Yes
ProCurve 2520G-8 (J9298A) Yes, fully tested in-house HP J9298A Switch 2520G-8-PoE, revision J.15.09.0028, ROM J.14.05 (/ws/swbuildm/J_rel_hartford_qaoff/code/build/walle(J_rel_hartford_qaoff)) (Formerly ProCurve) - 4-30-2018
ProCurve 2520G (J9299A) Yes Works with firmware 15.09.0022. Does not work with firmware j.14.54. Updated 7-11-2014.
ProCurve 2520-24-PoE (J9138A) Yes, fully tested in-house HP J9138A Switch 2520-24-PoE, revision S.15.09.0029, ROM S.14.03 (/ws/swbuildm/rel_hartford_qaoff/code/build/elmo(rel_hartford_qaoff)) (Formerly ProCurve) - 4-30-2018
ProCurve 2520-48G-PoE+ (J9729A) Yes, fully tested in-house Firmware WB.15.12.0015, ROM WB.15.04. Updated 4-14-2016.
HP J9776A 2530-24G Switch Yes, fully tested in-house Revision YA.16.06.0006, ROM YA.15.20 - 7-16-2021
ProCurve 2524 Yes, fully tested in-house
Procurve 2529G-8-PoE (J9298A) Yes 9-15-2015. Software J.14.61 ROM J.14.05
2610-24-PWR (J9087A) Yes, in single switch mode only. See comments. 10-2-2018. Revision R.11.54, ROM R.10.06 (/sw/code/build/nemo(ndx)) - customer reports that it does not map the whole stack, only the master unit maps. Further investigation revealed that the HP-STACK-MIB is not populated and the number of ports in ifIndex count is only the count of the master unit.
2848s Yes
2900-48G (J9050A) Yes, in single switch mode only. See comments. 1-25-2019. Revision unknown at this time. - customer reports that it does not map the whole stack, only the master unit maps. Further investigation underway. Most likely also applies to the 2900-24G (J9049A). Last firmware for this switch was released 15 Jan 2010 and end of sale was Oct 1, 2009.
2910al Yes
2910G-24 (J9279A) Yes, fully tested in-house 9-1-2016. revision Y.11.44, ROM N.10.02
ProCurve 2910 Yes Reported by customer 5-2-2017. Firmware W.14.28 (11-05-09)
ProCurve 2910al-48port Yes Reported by customer 5-2-2017. Firmware W.14.38
2920 (J9728A) Yes, fully tested in-house 9-1-2016. revision WB.15.13.0005, ROM WB.15.05 Stacked. Also another switch WB.15.18.0007, ROM WB.15.05
2920-48G (J9728A) Yes, fully tested in-house Firmware WB.16.02.0008, ROM WB.16.01. Updated 7-16-2021.
Older: Firmware WB.15.13.0005, ROM WB.15.05. Updated 4-13-2016.
2920-48G-POE+ (J9729A) Yes, fully tested in-house Firmware WB.16.02.0008, ROM WB.16.01. Updated 7-16-2021.
Older: Firmware WB.15.18.0011, ROM WB.16.01 Updated 9-1-2016.
Aruba 2930F Yes KB.16.07.0003 and KB.16.05.0007 - 4-29-2020
Aruba 2930F-8G (JL258A) Yes KB.16.07.0003 - 4-29-2020
ProCurve 3200 Yes
ProCurve 3400CL Yes
Aruba 3810M Switch Stack Yes, fully tested in-house Revision KB.16.04.0008, ROM KB.16.01.0008 - 7-16-2021
4000M Yes
4204v1 with 96 ports, four J8768A module Yes, fully tested in-house ProCurve J8770A Switch 4204vl, revision L.11.47, ROM L.10.03 (/sw/code/build/rmm) - 4-30-2018
Aruba 5406Rzl2 (J9851A) Yes KB.16.07.0003 - 4-29-2020
Aruba 5412Rzl2 (J9851A) Yes KB.16.05.0007 (switch and router) and KB.16.07.0003 (switch only) - 4-29-2020
ProCurve 8212zl (J9091A) Yes ProCurve 8212zl HP J9091A Switch, revision K.15.18.0010, ROM K.15.30 (/ws/swbuildm/rel_quebec_qaoff/code/build/btm(swbuildm_rel_quebec_qaoff_rel_quebec)) (reported 3-4-2020)

Juniper

Model Does it map? Comments
ex2200-24t-4g Yes, fully tested in-house JUNOS 12.3R12.4, tested August 2017
EX4200-48T Yes JUNOS 10.4R3.4

LG - Ericsson

Model Does it map? Comments
ES-2026P Yes Firmware 1.2.0.8, customer test Aug 2018

Richard Hirschmann & Gmbh Co.

Model Does it map? Comments
MACH4002-48P-L3P Yes HW:1.02 Running SW Version - L3P-09.0.14 tested by customer April 29, 2021

LinkSys

Model Does it map? Comments
SRW224G4 Yes, fully tested in-house

N-Tron

Model Does it map? Comments
708 Yes
716 Yes

Netgear

Model Does it map? Comments
FSM7328PS Yes, fully tested in-house
FS726TP No, fully tested in-house Switch firmware V2.0.1_14 (and V2.0.1_02 - June 10, 2017) does not appear to support mapping as of Feb 9, 2015.
FS750T2 Yes, with restrictions - see comments Switch must have lower case community name 'public' to map. Tested with firmware version 1.1.15 as of 3-30-2016
GSM7224R Yes, fully tested in-house
GSM7328S Yes, fully tested in-house
GS110TP Yes, fully tested in-house 9-1-16, firmware 5.4.2.18 rom BCM53312_B0
GS724Tv3 Yes, fully tested in-house Firmware v5.4.2.9
GS748TR Yes, fully tested in-house

Nortel

Model Does it map? Comments
BES 100-24T Yes, fully tested in-house
5520 Yes
8610 Yes
Nortel Baystack 450-24T Yes Port speed may show 200Mbs instead of 100Mbs

SMC

Model Does it map? Comments
SMC6128L2 Yes, fully tested in-house

TP-Link

Model Does it map? Requires 2.84 or later. Comments
T1600G-28PS Yes by customer who had V2 and V3 hardware Hardware Version: 3.0 Firmware Version: 3.0.3 Build 20190430 Rel.43300(s) - 9-25-2019
T1600G-28TS Yes, fully tested in-house and by customer who had V2 and V3 hardware Hardware Version: 3.0 Firmware Version: 3.0.0 Build 20180130 Rel.33015(s) - 10-22-2019
T2600G-18T Yes 3-22-2019
TL-SG108PE Yes 10-3-2019

TRENDnet

Model Does it map? Comments
TEG-S50ES No The switch SNMP implementation is not complete. While the switch does allow SNMP communication, it appears that only IF-MIB and RFC1213-MIB are supported. No BRIDGE-mib or other MIBs required to map.
TEG-S80ES No The switch SNMP implementation is not complete. While the switch does allow SNMP communication, it appears that only IF-MIB and RFC1213-MIB are supported. No BRIDGE-mib or other MIBs required to map.

Ubiquiti

Model Does it map? Comments
UBNT-ES16XG Yes, fully tested in-house Firmware Version: 3.83.6587, tested 8-11-2017

ZyXEL

Model Does it map? Comments
GS1900-16 Yes, fully tested in-house Firmware Version: V2.00(AAHJ.2)
GS2210-24HP Yes Firmware Version: V4.50(AANE.4)